XTC Power Products Polaris General 19+ and Ranger XP 1000 18+ Self-Canceling Turn Signal System with Horn

Self-Canceling Turn Signal Kit for Kawasaki KRX 1000

XTC Power Products Leads the way in UTV wiring. You will never leave your turn signal on with our new Self-Canceling Turn Signal System for the Kawasaki KRX 1000. Similar to its predecessor, the TSS (Turn Signal System), the ATS is a Plug and Play easy install Kawasaki KRX turn signal kit. The ATS consists of a small solid-state control box that performs its functions–differing from the prior generation’s larger control box. Like the TSS, the ATS Self-Canceling Turn Signal Kit is a modular design with vehicle specific SKUs.

How the ATS Works

All ATS part numbers include a marine grade rocker switch with laser-cut directional arrows that flash green when activated. When you press the turn signal rocker switch, the ATS will activate the turn blinker for a short duration and then self-cancel. This feature is useful for simple lane changes. On the other hand, an extended rocker switch press will yield a longer blinker duration suitable for making left- and right-hand turns. You can manually cancel the turn signal by pushing the actuator a second time.

Also Included

Also included in our Self-Canceling Kawasaki KRX turn signal kit is a ‘Hazard/Horn’ rocker switch. Pressing the top ‘Hazard’ side of the actuator will turn on the hazard lights, pressing it again deactivates them. Furthermore, pressing the lower portion of the custom rocker switch will activate the included street legal FIAMM horn. Each ATS has a vehicle-specific harness that plugs inline with the rear factory taillight harness. The brake light signal passes through the ATS. As a result, the opposing brake light still functions normally while the activated turn signal brake light flashes.

Hands-on with the ATS Kawasaki KRX Turn Signal Kit

Unlike our competitors, all ATS kits include an auxiliary power out for a license plate light or whip lights. Moreover the aux power is good for powering our 6″ LED Lit License Plate Frame.  Above all, each system comes with a vehicle specific power connection. Without a doubt, it’s easy to install with no wires to cut and no crimping. Because of its size, the ATS is versatile to mount as well. Everything needed to integrate with your vehicles OEM brake light harness included. Unplug the rear light harness, plug-in ours, and enjoy. XTC Power Products, made in America and Wired For Fun®!

• Plug and Play Easy Install
• Fits 2019-Up Polaris General with and without Ride Command
• Fits Ranger XP 1000 and XP 1000 Crew (non ride command or non Northstar factory installed winch models)
• Fits 2018-Up Polaris Ranger XP 1000 (NON CREW MODELS ONLY IN 2018)
• Connects to New Polaris Pulse Busbar for Power
• Includes two .75″ 3 LED front Amber Lights
• Plugs into OEM Brake Light Harness, using Factory Rear Lights
• Laser Etched LED Lit Turn Switch
• Lit Emergency Hazard Switch
• Rear Power Out for optional license plate light
• Made in the USA!